66-3115CB
66-3115DC
66-3115EC
66-3115ED
66-311502C
66-311502D
66-321502E
66-311502E
66-38150302
66-32150302
66-31150302
66-28150302
66-38150402
66-32150402
66-31150402
66-28150402
66-38150403
66-32150403
66-31150403
66-28150403
66-38150603
66-32150603
66-31150603
66-38150604
66-32150604
66-31150604
66-28150604
66-32150804
66-31150804
66-38150806
66-32150806
66-31150806
66-38151008
66-32151008
66-31151008
66-38151206
66-32151206
66-31151206
66-38151208
66-32151208
66-31151208
66-38151210
66-32151210
66-31151210

PE IPS Molded Butt Fusion Reducer

© 2013 HARCO Fittings. All Rights Reserved.
(434) 845-7094
Sales@harcofittings.com
E-mail Fax HARCO
(434) 845-8562
moldbutt001036.jpg product2.jpg moldbutt001030.jpg
Your are here:
HomeProducts > PE > Molded Butt Fusion
moldbutt001034.jpg photogallery1.jpg aboutus1.jpg contactus1.jpg links1.jpg moldbutt001028.jpg pemoldbutt2.jpg moldbutt001023.jpg moldbutt001021.jpg moldbutt001019.jpg moldbutt001017.jpg moldbutt001015.jpg
Molded
Product Details
Technical Specifications
irrigation2.jpg moldbutt001032.jpg moldbutt001026.jpg PE (HDPE) IPS Molded Butt Fusion Reducer
Material: Dual Rated 4710/3608 Resin, Black
Standards: ASTM D3261, AWWA C906
polyethylenepe2.jpg moldbutt002013.gif moldbutt002011.gif
4 of 6
Site Map moldbutt001008.jpg moldbutt001006.jpg moldbutt001005.jpg moldbutt001004.jpg Share Call HARCO (434) 845-7094 moldbutt002001.jpg
PE Quote Form
NOTE: The “Fitting DR” is the DR of the base fitting from which the fitting is made. This DR is the DR of the piping system for which the base fitting is appropriate to use. The “End DR” is the DR of the ends of the fitting. If the End DR is larger than the Fitting DR the ends have been machined. The “End DR” governs the “rating” of the fitting. Best practice to maximize the life of the fusion between the pipe and the fitting and to reduce the variables present in the fusion process is to match the DR of the ends of the fittings to the DR of the pipe to which it is fused.