65-342603
65-332603
65-322603
65-312603
65-292603
65-282603
65-262603
65-252603
65-342604
65-332604
65-322604
65-312604
65-292604
65-282604
65-262604
65-252604
65-382606
65-342606
65-332606
65-322606
65-312606
65-292606
65-282606
65-262606
65-252606
65-382608
65-342608
65-332608
65-322608
65-312608
65-292608
65-282608
65-262608
65-252608
65-382610
65-342610
65-332610
65-322610
65-312610
65-292610
65-282610
65-262610
65-252610
65-382612
65-342612
65-332612
65-322612
65-312612
65-292612
65-282612
65-262612
65-252612
65-382614
65-342614
65-332614
65-322614
65-312614
65-292614
65-282614
65-262614
65-252614
65-382616
65-342616
65-332616
65-322616
65-312616
65-292616
65-282616
65-262616
65-252616
65-382618
65-342618
65-332618
65-322618
65-312618
65-292618
65-282618
65-262618
65-252618
65-382620
65-342620
65-332620
65-322620
65-312620
65-292620
65-282620
65-262620
65-252620
65-382622
65-342622
65-332622
65-322622
65-312622
65-292622
65-282622
65-262622
65-252622
65-382624
65-342624
65-332624
65-322624
65-312624
65-292624
65-282624
65-262624
65-252624

PE IPS Fabricated Butt Fusion 22˝° Bend

© 2013 HARCO Fittings. All Rights Reserved.
(434) 845-7094
Sales@harcofittings.com
E-mail Fax HARCO
(434) 845-8562
fabbutt001038.jpg product2.jpg fabbutt001032.jpg
Your are here:
HomeProducts > PE > Fabricated Butt Fusion
fabbutt001036.jpg photogallery1.jpg aboutus1.jpg contactus1.jpg links1.jpg fabbutt001030.jpg pefabbutt2.jpg fabbutt001020.jpg fabbutt001018.jpg fabbutt001016.jpg fabbutt001014.jpg fabbutt001012.jpg
Two-Segment, Fabricated
Product Details
Technical Specifications
PE (HDPE) IPS Fab Butt Fusion 22 Bend
Material: Dual Rated 4710/3608 HDPE Resin, Black
Standards: AWWA C906
irrigation2.jpg fabbutt001034.jpg fabbutt001028.jpg fabbutt002014.jpg
PE Quote Form
polyethylenepe2.jpg fabbutt002012.gif fabbutt002010.gif
1 of 8
Site Map fabbutt001007.jpg fabbutt001005.jpg fabbutt001004.jpg fabbutt001003.jpg Share Call HARCO (434) 845-7094
NOTE: The “Body DR” is the DR of the pipe from which the fitting is made. The “End DR” is the DR of the ends of the fitting. The convention of the PE industry in the case of pressure applications is to fabricate fittings from pipe that is at least one standard DR thicker than the DR of the pipe to which it is fused. Best practice to maximize the life of the fusion between the pipe and the fitting and to reduce the variables present in the fusion process is to machine the ends of the fittings to match the DR of the pipe.